Patient Protected Bacteria Free Water

Clean+Clear® Ceramic Water Purification System removes all particulates to 0.5 micron and captures 100% of generic bacteria.

• Clean+Clear® filtration unique 3 step filtration system: Ceramic with self sanitizing media and granular activated carbon bed.
• 100% organic filtration with no chemicals added to your patients water supply.
• Lowest ownership cost – up to 69% more cost effective than other systems.
• In addition to filtering numerous and various contaminants and hazardous wastes from your dental office water, the efficiency of the Clean+Clear® Water Filtration Systems is also certified for bacteriological removal - including E.coli.
• The Clean+Clear® Point of Entry, or POE, Water Filtration System is significantly more cost effective and efficient to operate than Reverse Osmosis/RO or daily chemical add systems.
• The Clean+Clear® Point of Use, or POU, Water Filtration System keeps all captured contaminants in the filter, no contaminant exposure to staff.
• The Clean+Clear® systems significantly cleanse water of poor color, bad odor and poor taste. In addition, both systems effectively filter the contaminants and hazardous materials.
• Specifically, the bacteriological filtering capacity of the Clean+Clear® ceramic water filter element was independently tested. The test demonstrated the filter's capacity to block 100% of generic E.coli bacteria, tested @ 25,000 CFU.

The Clean+Clear® filtration system offers many other important and distinctive features and benefits:

• No moving parts. There is nothing to maintain until the Clean+Clear® filter cartridge needs to be replaced.
• No electricity is required. There are no electronic controllers, no switching valves, and no diaphragms to fail.
• No back flushing required. Some competitor’s filters require back flushing; this can waste up to 38,000 gallons of water per year back flushing just one hour per week at 12 gallons per minute.
• No loss of water pressure. Some competitor’s filters result in a significant drop in water pressure, resulting in lower flow rates and higher per gallon filtration costs.
• No bacteria buildup. The water storage tanks in reverse osmosis, or RO, systems are an ideal breeding ground for many types of bacteria/bio-film. In most residential RO systems, this growth can significantly affect the quality of the purified water.
• Consistently effective filtration over the life of the filter cartridge. Some competitor’s products use a pressed block filter element, and water will create pathways as it flows through the pressed block. These become paths of least resistance, and water will continue to flow through these same pathways rather than through other areas of the pressed block. The Clean+Clear® filter employs a loose filter element design. Water is distributed evenly throughout the filter element and is in contact with the filter bed at all times – all water is filtered and the entire filter element is fully utilized.
• Extended filter life. The typical life of a Clean+Clear® POE filter is 10-14 months. The typical life of a Clean+Clear® POU filter is 1,000 gallons, as compared to the 100 gallon useful life of leading competitor’s filters.
• Safe, easy, and quick, filter replacement. All Clean+Clear® filter cartridges are a sealed, one piece element, so there is no contact with captured contaminants. In addition, the patented Clean+Clear® housing design allows for quick and easy filter replacement: